LAIRD FINGERSTOCK
LAIRD ORDERING INFORMATION
Part Number Format
Example:
Stock Item Unique Part No. Finish I.D.
0 0 9 7 — 0 5 2 0 — 0 2
• In the above example, Laird part number 0097-0520-02 is a
97-520 RFI/EMI shielding gasket with a bright finish
• When ordering UltraSoft ® items, the stock item prefix will
be 0098 or 0078. The above example in UltraSoft would be
0098-0520-02.
• When ordering coil, the prefix 0C should precede the stock
item number; for example: 0C97, 0C98, 0C77 or 0C78
• When ordering stainless steel items, the stock item prefix will
be 0095
• Standard plating finish is 0.0001 in. (0.0025 mm) min. [gold
0.00005 in. (0.0013 mm) min.] but can be varied to meet
your custom needs
• Modifications to standard parts are specified by an X
(following finish I.D.) for quoting only. Upon ordering,
a specific part number will be assigned.
• For tape options, see Adhesive Mounting — Sticky Fingers ®
on page 16
• Use the catalog number for the unique part number and refer
to the following chart for finish I.D.
Plating Finishes